喷码机模板

Welding Wire Safety Operation Regulations

In order to ensure the safety of welding wire during storage, handling and use, and avoid personal injury or property loss, please carefully understand and abide by the following safety precautions:

1. During the storage of welding wire, the warehouse should be kept dry to avoid rain or damp and rust.

2. Forklifts must be used to transport the whole pallet. During the transportation, the speed of the vehicle should be controlled to prevent the welding wire from tipping over and hurting people or breaking the welding wire due to bumps. When handling a single coil of welding wire, care should be taken to handle it with care, hold it firmly, and avoid squeezing your hands and smashing your feet.

3. During use, it is strictly forbidden to directly touch the surface of the welding wire with hands, and clean gloves must be worn when necessary.

4. Wear protective glasses when threading silk or handling messy silk, and keep your face away from the severed head to prevent personal injuries such as piercing eyes or skin.

5. The welding place should be equipped with ventilation facilities to ensure good ventilation and avoid personal injury caused by smoke pollution.

6. Welding spatter will burn the skin, and the arc light of the welding wire will cause damage to the glasses. Before welding, labor protection equipment and a welding mask should be worn.

7. The welding process should prevent electric shock accidents and avoid personal injury.

8. The temperature of the test piece or product after welding is high, so direct contact with the human body should be avoided.

9. After welding, a small amount of welding slag will remain on the surface of the weld seam, and the welding slag will fly out of the workpiece when it cools down. Pay attention to protection when observing the weld seam.

Quality Management Office